JR Hydraulic Sales (315) 876-4273

Cross Auto-Cycle Valve is a modified series C directional control valve applied in a unique manner to provide automatic cycling.

Directional Control Valve used to extend and retract a double acting cylinder.

For proper auto-cycle operation, the "A" and "D" ports must be inter-connected.  If system flow rate exceeds 10 gpm, 1/2" minimum I.D. hose should be used.
Supplied with adjustable relief valve (set at 2000 psi at 10 gpm).

• 3/4" inlet and outlet ports
• 1/2" inlet ports
• complete handle assemblies located on the "A" port end of the valve.